This new, corrosion-resistant SuperVac Dual Stage Pump (2-Stage Pump) is made of high quality, industrial grade parts.

It has a flow rate of 11.3 cfm and is a dual oil vane pump. It spins two vanes around, pulling and pushing the air through the use of multiple compartments.

Clear
$2,590.00
Model 11.3 cfm
Clear selection
$2,590.00
Model 11.3 cfm
Clear selection

$2,590.00

$2,590.00

SuperVac Corrosion-Resist 2-Stage Pump (Commercial Grade)

This new, corrosion-resistant SuperVac Dual Stage Pump (2-Stage Pump) is made of high quality, industrial grade parts.

It has a flow rate of 11.3 cfm and is a dual oil vane pump. It spins two vanes around, pulling and pushing the air through the use of multiple compartments.

Features:

  • Motor speed of 1720 RPM at 60 Hz
  • Motor speed of 1440 RPM at 50 Hz.  
  • 1.5L oil reservoir – allowing more contamination to take place between oil changes, as a result of its greater dilution potential
  • Reduces oil-mist
  • Detachable oil filter

Fast-operating, long-lasting.

These pumps were designed for prolonged operation, and they can pull a vacuum down to .3 microns in a short amount of time.

The SuperVac Dual Stage Pump comes with a detachable oil filter, which helps reduce its operating noise.

As an added bonus, the vacuum pump can mitigate oil mist escaping. Instead, it brings the oil back into the system. This means you’ll have to perform maintenance on the unit less frequently, saving you money.

Multi-level gas ballast.

The unit contains a multi-level gas ballast which allows for variations of how deep and quickly the vacuum pulls. This, in turn, helps keep moisture and other contaminants out of the system.

Operating the SuperVac Dual Stage Pump:

The unit should always be run in a well-ventilated area to maintain optimal performance.

The internal, forced-oil system cools the dual-stage pump, while the built-in oil backflow prevention valve prevents the oil from flowing into places it shouldn’t.

Note: Changing the exhaust filter element is recommended about every 80 hours of use. As with all vacuum pump products, follow all printed instructions regarding safety and maintenance.

If you are having trouble picking out a pump or if you just need help figuring out which pump would be the right one for your laboratory, please don’t hesitate to give us a call.