PX10 Hydrocarbon Extractor Equipment

Contact Us for Pricing

Peer ReviewedPSI Certified – 50 State Compliant

The PX10’s expanded passive recovery design offers two times the capacity and twice the output of the PX5. The optimized extraction path reduces batch times, driving increased daily production by 200% over the PX5.
By eliminating the need for a dedicated solvent recovery pump, the PX10 saves annually in energy costs over comparable traditional systems while simultaneously removing the maintenance and replacement expenses associated with system pumps.
The PX10’s two 5lb material columns can be run in parallel, allowing a complete 10lb batch cycle in under 35 minutes or alternating 5lb batch cycles.

Our next level, closed-loop extractor for butane and propane

  • Suitable for
    Cannabis & Hemp
  • Solvents
    Butane, Propane & Blended
  • Capacity Per Batch
    10 lb (Two 5lb columns)
  • Cycle time
    35 minutes
  • Extracts
    Isolate/Sauce, Distillate, Vape Pens, Shatter, Wax/Sugar, Tincture and Edibles
  • Capacity
    Up to 160+ lb, per 8-hr shift
  • size iconSize:
    85” L x 36”W x 76” H
  • Warranty:

All New Expandable Design

The PX10 hydrocarbon extraction system features an expanded  linear design that has been engineered for simplicity while offering the latest hydrocarbon extraction technology.

PX10 Hydrocarbon Extractor bottom right view

Rethinking Solvent Recovery

Created with the operator in mind, the PX10 offers ultra-low temperature operation with fast recovery times, with or without a compressor. All functions and features are easily assessable in a linear process flow with conveniently located pass-throughs and ergonomics designed for the operator.

PX10 Hydrocarbon Extractor bottom right view

Operate With Confidence

The PX10 comes equipped with modern features and a robust, expanded double rack-mounted design. Each unit comes standard with two 5lb material columns, and integrated CRC columns for running ultra-cold to create high terpene full spectrum live resin or further refinement of low-quality biomass into valuable end products.

PX10 Hydrocarbon Extractor bottom view

Insightful Design

An integrated coil system reduces solvent recovery times and lets you operate without the added cost and maintenance requirements of a C1D1-rated compressor.

PX10 Hydrocarbon Extractor

Compliant For Tomorrow

The PX10 Hydrocarbon extractor is C1D1 compliant, engineer peer-reviewed, and made entirely in the USA. Built to complete 3A sanitary and cGMP standards, the PX10 has been engineered with future state compliance in mind to protect your safety and investment, making it the best cannabis extraction equipment on the market.

PX10 Hydrocarbon Extractor extraction

Award Winning Extracts

Our cannabis oil extraction equipment produces more award-winning concentrates than any other brand. Why? Because we refuse to sacrifice our standards. High-quality products require high-quality extraction.

PX10 Hydrocarbon Extractor extract


  • Designed to meet 3-A sanitary standards, Current Good Manufacturing Practices, and national and local fire code
  • Certified to Class I, Division 1, Pressure Safety Inspection (“PSI”) and is Engineer Peer Reviewed by PSI ensuring safety and compliance in all 50 states
  • Canadian CRN certification already in process and expected by the end of the third quarter this year
  • Easily paired with other Agrify Extraction modular offerings for rapid deployment and speed to market
  • Modular design provides a cost-effective path to address any growth needs that arise
  • High-efficiency design lowering both capital expenditures and operating expenses while improving throughput
  • Liquid jacketed columns enabling low temperature operation for improved product quality
  • Included material socks for faster material changeover between run cycles increasing daily output
  • The integrated PX10 molecular sieve columns for inline solvent desiccation removes moisture from solvent preserving the solvent’s effectiveness
  • Dedicated sight glasses in all columns makes process inspection fast and intuitive
  • Incorporating a maintenance-forward design, universal parts minimize the expense of stocking spares
  • Two inline CRC columns provide flexibility in purifying extract through customizable filtration media remediation removing a wide variety of different contaminants in real time
  • Easy-to-use two-bolt compliant tri-clamp service connections
  • Two EXERGY tube-in-tube heat exchanger’s enabling rapid solvent recovery


  • Class 1, Division 1 (C1D1) Compliant
  • Designed for GMP integration
  • PSI Certified – 50 State Compliant
  • Designed to ASME standards
  • Designed to meet 3A sanitary standards
  • NFPA 58 LPG
  • Engineer Peer-Reviewed
  • Made in USA


  • Precision offers the following on-site training programs for PX1 systems with our experienced extraction technicians:
    • Basic Install and Training, 3-Days On-Site
  • Expand your team’s extraction skills by adding the following course:
    • Craft Concentrates Training, 2 Days On-Site

Additional Specifications

System Specifications

Dimensions (approx.)  85″ L x 36″ W x 76″ H
Weight (approx.) 1350 lb
Warranty** One-Year

Certifications Available

Proved for Easy Certification

The PX5 Hydrocarbon Extractor is pre-approved and ready for professional engineers to field verify in all 50 states, so you can get operational faster. In partnership with PSI (Pressure Safety Inspectors), our cannabis extraction equipment comes with a PSI technical report certification and a field verification voucher to meet your state and local regulations. Once your system is installed by a Precision Technician, simply call PSI and schedule your field verification. Simple as that!
Hydrocarbon extraction process
You're viewing: PX10 Hydrocarbon Extractor Equipment Contact Us for Pricing
Get a Quote