Clear
$1,595.00$1,625.00
Size 12L 5L
Clear selection

$1,595.00$1,625.00

Full Bore Kit


– Lab Society

Full Bore

Our Full Bore Upgrade Kits (FBK) are finally here.

Now you have a plethora of options to upgrade your existing 5L or 12L kit.

From single to dual inline distribution adapters, your kits can be combined with our various primary/secondary condensers (MCK) and inline cold traps for extreme modularity, system stability, and vacuum tightness.

Less contamination, better distillation.

The inline multi-distribution adapters can rotate back and forth (swing arms), allowing you to collect desired fractions without disconnecting the system. This means reduced contamination and a better end product.

Utilizing full bore, there is little to no hold-up, as the size is continuous throughout, from the distillation head all the way through the rest of the unit.

Efficiency + modularity = big wins.

To promote increased condensation efficiency and cold trap efficiency, the 90° adapter has an air condenser that provides an area pressure drop (pre-cold trap) that creates turbulence prior to entering the inline cold traps (dual or single, via DCT-2HE, CTK-2HE).

KF connections.

Finally, the FBK includes KF25 flange adapters for a simple and superior, sealed system.

Included in the 5L Kit:

  • One (1) Liebig Condenser – 24/40 top outer, 29/42 bottom inner (primary), UV detector capable
  • One (1) Connecting Adapter – (29/42 top outer to 29/42 lower inner)
  • Two (2) Inline Distribution Adapters – one single and one dual, top & bottom joints 29/42, receiving joints 24/40
  • One (1) Distribution Receiver – 29/42 horizontal outer joint, 24/40 vertical outer joint, 45/50 Rodaviss top joint
  • One (1) 90° Adapter – 45/50 Rodaviss inner joint, horizontal 34/45 outer joint
  • One (1) KF25 to 24/40 and One (1) KF25 to 34/45 – made of PTFE, allowing KF25 connections to the system
  • All necessary clamps, clips, and adapters

Included in the 12L Kit:

  • One (1) Liebig Condenser – one 34/45 top outer joint, 29/42 lower inner (primary), UV detector capable
  • One (1) Connecting Adapter – (29/42 top outer to 29/42 lower inner)
  • Two (2) Inline Distribution Adapters – one single and one dual, top & bottom joints 29/42, receiving joints 24/40
  • One (1) Distribution Receiver – 29/42 horizontal outer joint, 24/40 vertical outer joint, 45/50 Rodaviss top joint
  • One (1) 90° Adapter – 45/50 Rodaviss inner joint, horizontal 34/45 outer joint
  • One (1) KF25 to 24/40 and One (1) KF25 to 34/45 – made of PTFE, allowing KF25 connections to the system
  • All necessary clamps, clips, and adapters

Note:

*This kit requires the use of our Lattice Rack Kit, to provide proper support and to fully utilize these pieces. It is extremely important to use a racking system similar to the Lattice Rack Kit (LRK) when operating the FBK.

*This kit is an upgrade to existing kits – You should make sure to double check that this upgrade kit is compatible with your current system!

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Full Bore Upgrade Kit”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.